Stop leak products

Stop Leak. Admixture to Produce Rapid Setting Mortar | Products of Vietnamese | High quality | Good price | LB Chemistry

DESCRIPTION:

Stop Leak is a liquid admixture  when mixed with portland cement becomes an extremely rapid setting plastic material used to stop pressure leaks in concrete and masonry structures.

USES:

Stop Leak can be used to stop water leaks in dams, foundation walls, manholes, pipelines, underground structures, swimming pools, foundtains, tunnels, basement walls and floors.

ADVANTAGES:

Will stop water under pressure.

ECONOMICAL:

Sets within 60 to 90 seconds, generates minimal heat when setting

Becomes extremely plastic when combined with portland cement

Stop Leak liquid must be stored at temperatures above freezing.

COVERAGE:

One plastic bottle 0.45kgs Stop Leak plus portland cement = can fill 1 hole.

LIMITATIONS:

Judgment must be used to mix Stop Leak in small quantities due tu the extremely rapid set. After the portland cement is added to the liquid Stop Leak, the mixed compound will set in approximately 60 seconds. This action allows the material to bond mechanically and chemically to saturated surfaces. A delay in setting, if required, can be attained by adding fine sand to the neat cement mixture or by reducing the amount of cement added to the liquid.

CAUTION:

Product is highly alkaline. If contact with eyes or skin occurs, flush immediately with copious amounts of water and contact a physician. If swallowed, induce vomiting and contact a physician immediately.

RUST CONVERTER

Description:

Rust Converter is a supreme product that converts rust. Halts existing rust and prevents future corrosion with a durable protective barrier

Application:

• Structures
• Automobiles
• Machinery
• Tools
• Use it on a multitude of applications

Technical Information:

• Non corrosion
• Does not effect the adhesion force between reinforcement and concrete
• Steel storage time after treatment with Rust Converter:

+ 6 months for normal environment

+ 1 month for marine and industrial enviroment

• Dry time is 1-2 hours and completely dry after 24 hours.

Application steps:

• Steel surface before being treated should blow away dirt, dry and free from grease
• Spray onto the steel surface to be treated. Spray 2 coats. Each spray is 20-30 minutes apart
• Work in dry conditions. Avoid direct contact with water or rain when the product is not completely dry (Completely dry product after 24 hours)

Important Note:

If the product is in direct contact with water or rain when the product is not completely dry then will create white salt on the surface of the steel bar. This salt does not affect the properties of steel, concrete. Conducting water spray to wash white stains on the surface of the steel bar and let it dry and then apply the next steps.

Storage Conditions:

Product must be stored in original, unopened and undamaged sealded packging in dry conditions

Colour:

Dark Green

Shelf Life:

18 months from date of production

Consumption:

• Steel has not been rusty: 1 litre Liquid approximately 10-12m2
• Steel has been rusted: 1 litre Liquid approximately 6-10m2