Ceramic tile adhesive for shower walls

VOG. Ceramic tile adhesive | Products of Vietnamese | High quality | Good price | LB Chemistry

Description

VOG is one component, premixed, modified polymer cement based tile adhesive
used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion.
Where to use:
- For wall surface: To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering.
- For floor and ground: To bond ceramic tile or building stone.
Advantages
- Stable performance, use directly after mix it with water;
- Good flexibility
- Nontoxic, non-radiant, no irritative odor;
Application
Surface Preparation:
- The surface should be vertical, flat, smooth and free of dust, grease and other contaminants.
Mixing
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture
- VOG 20kg barrel required approximately 4 - 4,8 litres of clean water
- VOG 5kg barrel required approximately 1 - 1,2 litres of clean water
The mixed materials is immediately ready to use and should be used within 25-30 minutes after mixing.